| TECHNICAL PROPERTIES | |
|---|---|
| Density | Part 1 : 1.50 g/cc Part 2 : 1.05 g/cc |
| Viscosity | Part 1 : > 10,000 cps Part 2 : 2000 cps |
| Adhesive Strength | 5 MPa |
| Avg Particle Size | < 40 μm |
| Color | Blue / Red / Grey |
| Mixing Ratio | 100 : 32 gms by weight |
| Pot life at 25OC | 30 - 40 minutes |
| Setting time at 25OC | 5 Hrs |
| Curing time at 25OC | 24H without Acetone addition 48H with 40% Acetone addition |
| Application | By brush / spray. Compatible spray gun: Pilot gun type P-80. Nozzle aperture: 1.57mm. |
| Thinning | For brush application (Approx. 5 - 10%). For spray application, use as per consistency required. |
| Overcoat time | 6 - 8 hrs. |
| Recommended Thickness | 0.8 – 1.0 mm |
| Coverage | 0.4 kg / m2 for 0.4-0.6 mm thick coat (Sprayed) |
| Hardness | 10.0 Hv5 |
| Max. Temp. use | 150 OC |
| Shelf life | 24 months |
Alumacoat-WR is a specially formulated 2 part Epoxy resin based coating comprising of hydrophobic micro-fine Ceramic powders. It is a smooth low friction coating designed to protect metals against corrosion and can withstand maximum temperature of 150 OC (302 OF).
Suitable SubstratesFerrous and non-Ferrous Metals.
Areas of ApplicationFan Propellers, Pump shafts, Pump housing, Flanges, Solar water tanks, Ovens, Chemical handling pumps, Butterfly Valves, etc.
Surface preparationFor optimal performance roughen the surface by means of sand blasting. In case not feasible, roughen with a sand paper (60/80 grit), a wire brush, machine brush or angle grinder.
Clean the surface with a vacuum cleaner or air gun to remove any loose particles.
Remove any grease or oil from the surface to be coated using Trichloroethylene (TCE)
Versatile Industrial Applications
