Back to Products
What is 'Zircosil'? Applications of 'Zircosil' micro milling beadsComparative Chart on typical features of 'Zircosil' versus other makes
Guidelines for using 'Zircosil' ceramic micro beads Calculation of bead charge for the millAdvantages of using 'Zircosil' micro beads
Comparative Chart on typical features of 'Zircosil' versus other makes
Characteristics Units
Zircosil Zirconium Silicate Beads from Jyoti India
Zircosil Zirconium Silicate Beads from France
Zircosil Zirconium Silicate Beads from China
Zircosil Zirconium Silicate Beads from Israel
Density
gm/cc
4.4
3.84
3.75
4.08
Water absorption
%
0.00
0.00
0.00
0.00
Bulk density
Kg/ltr
2.60 
2.44
2.38
2.47
Hardness on Vicker's scale
1100-1150
690.00
650.00
962.00
Hardness on Moh's scale
9.00
7.50
7.50
8.50
Sphericity for 90% of the beads
>0.9
>0.9
>0.9
>0.9
Av. bead size taken for crushing strength
mm
1.50
1.49
1.51
1.50
Crushing strength
Kgf
72.5
47.306
51.0
70.22
Colour
Light Grey
Off white
Off white
White
Wear rate after 100hrs. of milling
Wear loss
% / hr
0.00582
0.041
0.056
0.034
Surface condition of beads observed after 100hrs. of milling
Glossy satin smooth surface free of pin holes
Glossy satin smooth with pin holes &
broken beads
Glossy satin smooth
with pin holes & beads fused with other beads
Dull surface finish beads with pin holes

Beads are available in following fraction range sizes:

Broad Fraction Range : ø0.40/0.70, ø0.70/1.20, ø1.20/1.70, ø1.70/2.4, ø2.40/2.80, ø2.80/3.30

Narrow Fraction Range: ø0.40/0.60, ø0.60/0.80, ø0.80/1.00, ø1.00/1.20, ø1.20/1.40, ø1.40/1.60, ø1.60/2.00, ø2,00/2.40

Media | Feedback | Careers | Sitemap
All contents © copyright JYOTI CERAMIC. All rights reserved. Best viewed in 1024 x 768