Back to Products
Manufacturing Process Typical Properties Mill Lining Blocks Grinding Media
Manufacturing Process

Manufacturing Process
Steatite is a magnesium meta silicate composite formulated from selected quality soapstone, china clay, barium carbonate and other chemicals in its residual. The raw mix composite is wet milled to micro fine particle size. The composite slurry is spray dried in micro processor controlled spray dryer to form homogeneous free flowing spherical granules. Such granules are pressed at high pressure compaction in T.C. moulding tools in uniaxial automatic compacting presses.

The pressed mill lining blocks and grinding media are sintered at around 1350°C in gas fired high temperature shuttle - tunnel kilns in natural oxidising atmosphere to form an impervious, vitrified, tough, non porous, dense hard material. Due to its mechanical strength and other relative features steatite ceramic is found most suitable ceramic composite for ball mill linings and grinding media.

The true value of mill lining and grinding media is measured by length of trouble free service in relation to mill production output. Our steatite grinding media is well known for its excellent quality, optimum milling results and longer service life

Media | Feedback | Careers | Sitemap | CSR Policy  
All contents © copyright JYOTI CERAMIC. All rights reserved. Best viewed in 1024 x 768