Back to Products
Manufacturing Process Typical Properties Mill Lining BlocksGrinding Media
Mill Lining Block Sizes And Installation Advantages
Advantages
Following features and benefits are worth considering to use Jyoti steatite ball mill linings for milling substances of hardness below 5 on Moh's scale.
1. Lower in cost as compared to alumina ceramic
2. Light in weight as compared to alumina ceramic
3. Longer service life as compared to traditional ceramic lining materials
4. Easy to machine, chip or grind
5. Substantial increase in mill volume due to lower thickness as compared to traditional stone lining

Steatite ceramic mill lining blocks are tough and hard to resist high impact, high abrasion and corrosion wear, high temperature resistant than steel, rubber, polyurethane, natural stone and other conventional mill lining materials. Under normal working conditions Steatite ceramic mill lining lasts many times longer than steel, rubber, stone and other conventional porcelain lining materials. Hardness of Steatite ceramic is 7.5 on Moh's scale and 500 at 10 kgs load on Vickers scale against the tool steel which is having hardness of 5.5 on Moh's scale, and 400 at 10 kgs load Vickers scale. Steatite ceramic is resistant to acids and alkalis except hydrofluoric acid.
 
         
Media | Feedback | Careers | Sitemap | CSR Policy  
All contents © copyright JYOTI CERAMIC. All rights reserved. Best viewed in 1024 x 768