Back to Products
About Inorganic Ceramic Adhesive Cements Jyalucem®-20 Zircocem®-1 Zircocem®-5 Zircocem®-C9 Alucem®-HT2
Zircocem®-C9

Ceramic Adhesive Cement

Zircocem- C9 is a single component Zircon based high strength dispensable ceramic adhesive potting compound, and is typically mixed with water or Jyoti Ceramic’s MR liquid (which is a moisture resistant liquid) to enhance the cement’s moisture resistance properties.

 
Mixing Ratio
Powder 100gms
:
Water 25ml.
OR
Powder 100 gms. 
:
MR Liquid 25ml.

Method:
Mix 100gms.of powder, add 25ml water or MR liquid (well shaken) and mix gradually to obtain a uniform paste of toothpaste consistency. The pot life of this mixture at 25°C is 35-40mins.

Curing:
Initial setting time of Zircocem- C9 cement at ambient temperature (25°C/ 77°F) is 4-5 hrs. and curing time is 24hrs. The time required also depends upon the thickness of adhesive paste to achieve optimal electric and mechanical properties. To accelerate the curing time we suggest a heat cure schedule as given below but only after thorough air drying of cement.

  1. For water mixed: Around 2hrs of gentle heating up to 110°C (230°F) in a heating oven.
  2. For cement mixed in liquid: Around 2-3hrs. gentle heating at 140°C - 150°C (284°F - 302°F) in a heating oven.

Typical Properties:

Colour Off White
Density 2.9 gm / cc
Pot life at room temp(25°-30°C/ 77°- 104°F) for 45mins.
Di electric strength          1200 – 1250 Volts / mm
Volume Resistivity           107 – 109 ohm – cm at r.t
Adhesive strength             36kgs / cm2
Porosity 2 to 3%
Chemical & Thermal shock resistance Excellent
Mechanical strength Excellent
Service temperature >1500°C (2732°F)

Applications:

  • Ideal for sealing cartridge heaters, infrared heaters etc.
  • Fixing of halogen lamp, embedding electrical heating elements and wire wound resistors etc.
  • Adhering glass to glass, glass to ceramic, ceramic to ceramic, glass to metal, ceramic to metal etc.

Characteristics:

  • High temperature resistance
  • Excellent adhesion and bonding strength

Cleaning:
All pots and tools used for mixing the Zircocem- C9 cement paste should be thoroughly cleaned with detergent and water before the cement cures.

Packaging:
All the powder components of the Inorganic Adhesive Cement is available in 1, 5 & 10kgs. airtight strong HDPE containers and the liquid component in proportionate quantity in sturdy HDPE plastic bottles.

Storing:
ZIRCOCEM- C9 powder has shelf life of around 1 year if stored in original air tight container in dry conditions at ambient  temperature.

Disclaimer: The information gathered in this brochure is based on the results obtained from our R&D lab & is believed to be reliable.  However, since the conditions of application and use of Zircocem - C9 is beyond our control, we cannot stand warranty or accept representation regarding the results obtained by the use of the product, or that such use will not infringe on any patent. This information is provided in good faith that the user will evaluate the material through testing and determine the suitability of the product before use. Liability of Jyoti Ceramic Industries  ceases for any damage, injury etc. caused by the mishandling of the product. Jyoti Ceramic Inds. Pvt. Ltd. disclaims any warranty of merchantability or fitness for particular application.

 
         
Media | Feedback | Careers | Sitemap | CSR Policy  
All contents © copyright JYOTI CERAMIC. All rights reserved. Best viewed in 1024 x 768