Back to Products
About Inorganic Ceramic Adhesive Cements Jyalucem®-20 Zircocem®-1 Zircocem®-5 Zircocem®-C9 Alucem®-HT2

Alumina Based - 2 Component - Ambient Temperature Curing

Alucem–HT2 is a two component Inorganic Ceramic Adhesive Cement, resistant to high temperature 1500°C / 2732°F curing at ambient temperature (25°C / 77°F).
It consists of a fine dry powder (Part I) and a Liquid (Part II) to be mixed in the ratio specified below:

Mixing Ratio
Powder Part I
Liquid Part II
1 Part by weight
1 Part by weight

Mix Alucem-HT2 powder and liquid in specified quantity to form a smooth uniform paste of tooth paste consistency and apply on thoroughly cleansed and abraded parts to be cemented.

Leave the parts to cure for 24 hours at ambient temperature (25°C / 77°F).

Applications: -

  • Ideal for bonding, assembling, sealing and joining ceramic to metal, ceramic to ceramic, glass to ceramic, glass to metals, ceramic to quartz etc.
  • Ideal for fixing ceramic Pyrometry tubes with metal sleeves for Pyrometry thermocouple assembly
  • Bonding, potting and encapsulation of electrical heater elements, metal resistor elements, high heat producing electrical bulbs etc.


  • Excellent thermal conductivity, electrical and mechanical properties.
  • Excellent bonding strength
  • Maximum service temperature 1500°C / 2732°F
  • Provides the option to use as a thick or thin coating


Metal sleeve cemented to ceramic Pyrometry tube with Alucem-HT2


All pots and tools used for mixing the Alucem -HT cement paste should be thoroughly cleaned with detergent and water before the cement cures.

Alucem-HT2 adhesive (part I) cement powder is available in 1, 5 and 25 Kgs. strong air tight HDPE plastic containers. The liquid components (curing agents) are packed in proportionate quantities in strong HDPE plastic bottles.

Both components have a shelf-life of around 1year if stored in original airtight containers in dry conditions at room temperature.

The information gathered in this brochure is based on the results obtained from our R&D lab & is believed to be reliable.  However, since the conditions of application and use of Alucem-HT2 is beyond our control, we cannot stand warranty or accept representation regarding the results obtained by the use of the product, or that such use will not infringe on any patent. This information is provided in good faith that the user will evaluate the material through testing and determine the suitability of the product before use. Liability of Jyoti Ceramic Industries  ceases for any damage, injury etc. caused by the mishandling of the product. Jyoti Ceramic Inds. Pvt. Ltd. disclaims any warranty of merchantability or fitness for particular application.

Media | Feedback | Careers | Sitemap | CSR Policy  
All contents © copyright JYOTI CERAMIC. All rights reserved. Best viewed in 1024 x 768